Current issue


2026-06
Volume 12, issue 02
<< prev. next >>
ISSN: 2274-0422

Article Management

You must log in to submit or manage articles.

You do not have an account yet ? Sign up.

Most downloaded articles (last week)


Page 4 of 11, showing 20 record(s) out of 219 total

3D models related to the publication: "From teeth to pad: tooth loss and development of keratinous structures in sirenians"
Lionel Hautier Logo, Helder Gomes Rodrigues Logo, Sérgio Ferreira-Cardoso and Frédéric Delsuc Logo
Published online: 29/11/2023

Keywords: keratinous pad; Sirenians; Steller’s sea cow; tooth loss

https://doi.org/10.18563/journal.m3.218

  Abstract

    This contribution contains the 3D models described and figured in the following publication: Hautier L, Gomes Rodrigues H, Ferreira-Cardoso S, Emerling CA, Porcher M-L, Asher R, Portela Miguez R, Delsuc F. 2023. From teeth to pad: tooth loss and development of keratinous structures in sirenians. Proceedings of the Royal Society B. https://doi.org/10.1098/rspb.2023.1932 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 04 (2023)

PDF
3D models related to the publication: Comparative anatomy of the vocal apparatus in bats and implication for the diversity of laryngeal echolocation.
Nicolas L. M. Brualla Logo, Laura A. B. Wilson Logo, Vuong T. Tu Logo, Richard . Carter Logo and Daisuke Koyabu Logo
Published online: 28/06/2024

Keywords: Chiroptera; larynx; mammalian nasopharyngeal morphology; Micro-CT; vocal tract

https://doi.org/10.18563/journal.m3.219

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Brualla et al., 2024: Comparative anatomy of the vocal apparatus in bats and implication for the diversity of laryngeal echolocation. Zoological Journal of the Linnean Society, vol. zlad180. (https://doi.org/10.1093/zoolinnean/zlad180). Bat larynges are understudied in the previous anatomical studies. The description and comparison of the different morphological traits might provide important proxies to investigate the evolutionary origin of laryngeal echolocation in bats. 

  Specimens
 
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models related to the publication: New remains of Neotropical bunodont litopterns and the systematics of Megadolodinae (Mammalia: Litopterna)
Juan D. Carrillo Logo, Catalina Suarez Logo, Aldo Benites-Palomino Logo, Andrés Vanegas, Andrés Link Logo, Aldo F. Rincón Burbano Logo, Javier Luque Logo, Siobhán B. Cooke Logo, Melissa Tallman Logo and Guillaume Billet Logo
Published online: 31/08/2023

Keywords: fossils; La Venta; Litopterna; Miocene; South America

https://doi.org/10.18563/journal.m3.174

  Abstract

    This contribution contains the 3D models described and figured in: New remains of Neotropical bunodont litopterns and the systematics of Megadolodinae (Mammalia: Litopterna). Geodiversitas. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 03 (2023)

PDF
The endocranial cast of a 10 ka intentionally deformed human cranium from China
Yin Qiyu Logo, Li Qiang Logo, Ma Ming Logo, Zhang Wei Logo and Ni Xijun Logo
Published online: 27/07/2022

Keywords: endocranial cast; intentional cranial deformation; Northeast China

https://doi.org/10.18563/journal.m3.169

  Abstract

    This contribution contains the 3D model of an endocranial cast analyzed in “A 10 ka intentionally deformed human skull from Northeast Asia”. There are many studies on the morphological characteristics of intentional cranial deformation (ICD), but few related 3D models were published. Here, we present the surface model of an intentionally deformed 10 ka human cranium for further research on ICD practice. The 3D model of the endocranial cast of this ICD cranium was discovered near Harbin City, Province Heilongjiang, Northeast China. The fossil preserved only the frontal, parietal, and occipital bones. To complete the endocast model of the specimen, we printed a 3D model and used modeling clay to reconstruct the missing part based on the general form of the modern human endocast morphology.
      

  Specimens

    Homo sapiens IVPP-PA1616 View specimen

    M3#972

    The frontal region of the endocast is flattened, probably formed by the constant pressure on the frontal bone during growth. There is a well-developed frontal crest on the endocranial surface. The endocast widens posteriorly from the frontal lobe. The widest point of the endocast is at the lateral border of the parietal lobe. The lower parietal areas display a marked lateral expansion. The overall shape of the endocast is asymmetrical, with the left side of the parietal lobe being more laterally expanded than the right side. Like the frontal lobe, the occipital lobe is also anteroposteriorly flattened.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.972   state:published




    Download 3D surface file

    M3#976

    The original endocranial cast model (with texture) of IVPP-PA1616. It shows the original structures of the specimen, and was not altered in any way.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.976   state:published




    Download 3D surface file


 
  M3 article infos

Published in Volume 08, issue 03 (2022)

PDF
3D models related to the publication: Description of the first cranium and endocranial structures of Stenoplesictis minor (Mammalia, Carnivora), an early aeluroid from the Oligocene of the Quercy Phosphorites (southwestern France)
Camille Grohé Logo, Jérôme Surault Logo, Axelle Gardin Logo and Louis de Bonis Logo
Published online: 08/05/2022

Keywords: Aeluroidea; bony labyrinth; brain endocast; stapes; Stenoplesictoid

https://doi.org/10.18563/m3.166

  Abstract

    This contribution contains the 3D models described and figured in the following publication: Bonis, L. de, Grohé, C., Surault, J., Gardin, A. 2022. Description of the first cranium and endocranial structures of Stenoplesictis minor (Mammalia, Carnivora), an early aeluroid from the Oligocene of the Quercy Phosphorites (southwestern France). Historical Biology. https://doi.org/10.1080/08912963.2022.2045980 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 08, issue 02 (2022)

PDF
CT scan data for the original holotype of Hamadasuchus rebouli Buffetaut 1994
Yohan Pochat-Cottilloux Logo, Joël Lachambre Logo, Romain Amiot Logo and Jeremy E. Martin Logo
Published online: 06/02/2024

Keywords: Crocodylomorpha; CT-scan; Hamadasuchus; Kem Kem; Morocco

https://doi.org/10.18563/journal.m3.222

  Abstract

    The holotype of Hamadasuchus rebouli Buffetaut 1994 from the Kem Kem beds of Morocco (Late Albian – Cenomanian) consists of a left dentary which is limited, fragmentary and reconstructed in some areas. To aid in assessing if the original diagnosis can be considered as valid, the specimen was CT scanned for the first time. This is especially important to resolve the taxonomic status of certain specimens that have been assigned to Hamadasuchus rebouli since then. The reconstructed structures in this contribution are in agreement with the original description, notably in terms of alveolar count; thus the original diagnosis of this taxon remains valid and some specimens are not referable to H. rebouli anymore. 

  Specimens
 
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D models related to the publication: Shape diversity in conodont elements, a quantitative study using 3D topography.
Alexandre Assemat Logo, Ghislain Thiery Logo, Thibaud Lieffroy Logo and Catherine Girard
Published online: 17/01/2024

Keywords: Conodonts; Doolkit; Morphofunction; Scanning resolution; Topography

https://doi.org/10.18563/journal.m3.223

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Assemat et al. 2023: Shape diversity in conodont elements, a quantitative study using 3D topography. Marine Micropaleontology 184. https://doi.org/10.1016/j.marmicro.2023.102292

    P1 elements represent dental components of the conodont apparatus that perform the final stage of food processing before ingestion. Consequently, quantifying the shape of P1 elements across the topographic indices of different conodont species becomes crucial for deciphering the diversity in feeding behavior within this group. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D models related to the publication: An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico
Laurent Marivaux Logo, Jorge Velez-Juarbe Logo and Pierre-Olivier Antoine Logo
Published online: 16/07/2021

Keywords: Caribbean islands; Geomorpha; Paleobiogeography; Paleogene; Rodentia

https://doi.org/10.18563/journal.m3.128

  Abstract

    This contribution provides the raw files for the μCT-scan data and renderings of the three-dimensional digital models of two fossil teeth of a geomyin geomorph rodent (Caribeomys merzeraudi), discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described, figured and discussed in the following publication: Marivaux et al. (2021), An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico. Papers in Palaeontology. https://doi.org/10.1002/spp2.1388 

  Specimens

    Caribeomys merzeraudi LACM 162478 View specimen

    M3#712

    Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.712   state:published




    Download 3D surface file

    M3#714

    5µm µCT data set . Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France).

    Type: "3D_CT"

    doi: 10.18563/m3.sf.714   state:published




    Download CT data

    Caribeomys merzeraudi LACM 162449 View specimen

    M3#713

    Right lower molar (m1 or m2). The specimen was scanned with a resolution of 4.5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.713   state:published




    Download 3D surface file

    M3#715

    µCT data at 4.5µm

    Type: "3D_CT"

    doi: 10.18563/m3.sf.715   state:published




    Download CT data


 
  See original publication
  M3 article infos

Published in Volume 07, issue 03 (2021)

PDF
3D models related to the publication: “Trophic differentiation between the endemic Cypriot mouse and the house mouse: a study coupling stable isotopes and morphometrics”
 
Sabrina Renaud Logo, Eleftherios . Hadjisterkotis Logo, George P. Mitsainas Logo and Emilie A. Hardouin Logo
Published online: 18/11/2024

Keywords: biomechanics; geometric morphometrics; Mandible morphology; Mus cypriacus; Mus musculus domesticus

https://doi.org/10.18563/journal.m3.247

  Abstract

    This contribution contains 3D models of mandibles of Cypriot mice (Mus cypriacus) and house mice (Mus musculus domesticus) from the island of Cyprus. The niche partitioning of the two species was investigated using isotopic ecology, geometric morphometrics and biomechanics. Both species displayed generalist feeding behavior, modulated by fine-tuned adaptation to their feeding habits. The house mouse mandible, with a relatively large masseter area and an optimization for incisor biting, appears as an all-rounder tool for foraging on diverse non-natural items.
    These models are analyzed in the following publication: Renaud et al 2024, “Trophic differentiation between the endemic Cypriot mouse and the house mouse: a study coupling stable isotopes and morphometrics”, https://doi.org/10.1007/s10914-024-09740-5
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 04 (2024)

PDF
3D models related to the publication: Virtual brain endocast of Antifer (Mammalia: Cervidae), an extinct large cervid from South America
Emmanuelle Fontoura Logo, José D. Ferreira Logo, Jamile Bubadué Logo, Ana M. Ribeiro Logo and Leonardo Kerber Logo
Published online: 21/08/2020

Keywords: Antifer ensenadensis; brain endocast; Cervidae; late Pleistocene

https://doi.org/10.18563/journal.m3.121

  Abstract

    The present 3D Dataset contains the 3D models of the brain endocast analyzed in “Virtual brain endocast of Antifer (Mammalia: Cervidae), an extinct large cervid from South America”. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 06, issue 04 (2020)

PDF
3D models related to the publication: Interacting with the inaccessible: utilization of multimedia-based visual contents of Japan’s National Monument, the Taniwhasaurus mikasaensis (Mosasauridae) holotype for educational workshops at Mikasa City Museum
Kumiko Matsui Logo and Tomoki Karasawa
Published online: 18/10/2020

Keywords: Mosasauridae; Photogrammetry; surface scanner; Taniwhasaurus; Tylosaurinae

https://doi.org/10.18563/journal.m3.106

  Abstract

    The present 3D Dataset contains the 3D model used in in the following publication: Interacting with the inaccessible: utilization of multimedia-based visual contents of Japan’s National Monument, the Taniwhasaurus mikasaensis (Mosasauridae) holotype for educational workshops at Mikasa City Museum. 

  Specimens
 
  M3 article infos

Published in Volume 06, issue 05 (2020)

PDF
3D models related to the publication: The petrosal and bony labyrinth of Diplobune minor, an enigmatic Artiodactyla from the Oligocene of Western Europe
Maëva J. Orliac Logo, Ricardo Araújo Logo and Fabrice Lihoreau Logo
Published online: 26/05/2017

Keywords: Anoplotheriidae; bony labyrinth; Quercy Phosphorites

https://doi.org/10.18563/m3.3.1.e3

  Abstract

    This contribution contains the 3D models described and figured in the publication entitled "The petrosal and bony labyrinth of Diplobune minor, an enigmatic Artiodactyla from the Oligocene of Western Europe" by Orliac, Araújo, and Lihoreau published in Journal of Morphology (Orliac et al. 2017) https://doi.org/10.1002/jmor.20702.
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 03, Issue 01 (2017)

PDF
S.I. Data
3D models related to the publication: Prenatal growth stages show the development of the ruminant bony labyrinth and petrosal bone.
Loïc Costeur Logo and Bastien Mennecart Logo
Published online: 19/10/2016

Keywords: bony labyrinth; foetus; ossification timing; phylogeny; Ruminantia

https://doi.org/10.18563/m3.2.2.e3

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Costeur L., Mennecart B., Müller B., Schulz G., 2016. Prenatal growth stages show the development of the ruminant bony labyrinth and petrosal bone. Journal of Anatomy. https://doi.org/10.1111/joa.12549 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 02, Issue 02 (2017)

PDF
3D surface model related to the publication: An Unusual new species of Burmesescorpiops Lourenco 2016 from Cretaceous Burmese amber (Scorpiones: Palaeoeuscorpiidae: Archaeoscorpiopinae)
Zaw Dan Logo, Ko Zawgyi and Wilson Lourenço Logo
Published online: 03/11/2025

Keywords: Amber; Burmite; Cretaceous; Paleoarachnology; Scorpion

https://doi.org/10.18563/journal.m3.285

  Abstract

    In this contribution a third new species of the rare genus Burmesescorpiops Lourenço, 2016 is described. The discovery of this new element belonging to the family Palaeoeuscorpiidae Lourenço, 2003 and to the subfamily Archaeoscorpiopinae Lourenço, 2015 brings further elements to support the validity of the genus Burmesescorpiops. This generic group remains however, poorly speciose. This is the latest discovery of Burmesescorpiops wunpawng, the name is derived from the Kachin Hilltribe peoples who are indigenous to the area. The data provided here is a 3D surface. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 11, issue 04 (2025)

PDF
3D models related to the publication: Comparative endocranial traits in the crocodylians Leidyosuchus canadensis and Stangerochampsa mccabei from the upper Cretaceous of Alberta, Canada.
Garance Donzé Logo, Gwendal Perrichon Logo, Peggy Vincent Logo, François Therrien Logo and Jeremy E. Martin Logo
Published online: 14/01/2026

Keywords: endocast; Leidyosuchus; neurovascular canals; paratympanic sinus; Stangerochampsa

https://doi.org/10.18563/journal.m3.284

  Abstract

    This contribution contains the 3D models of the paratympanic sinus system, the endocast and the neurovascular bony canal of the maxilla, premaxilla and the jugal of Leidyosuchus canadensis and Stangerochampsa mccabei described and figured in the following publication: G. Donzé, G. Perrichon, P. Vincent, JE. Martin, 2026. Comparative endocranial traits in the crocodylians Leidyosuchus canadensis and Stangerochampsa mccabei from the upper Cretaceous of Alberta, Canada. Journal of Anatomy. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 12, issue 01 (2026)

PDF
3D model related to the publication: From limb to fin: an Eocene protocetid forelimb from Senegal sheds new light on the early locomotor evolution of early cetaceans.
Quentin Vautrin Logo, Fabrice Lihoreau Logo, Bernard Sambou, Moustapha Thiam, Jeremy E. Martin Logo, Rodolphe Tabuce Logo, Sylvain Adnet Logo, Renaud Lebrun Logo, Anne-Lise Charruault Logo, Raphaël Sarr Logo and Lionel Hautier Logo
Published online: 26/08/2019

Keywords: Cetacea; Eocene; Forelimb; Protocetidae; Senegal

https://doi.org/10.18563/journal.m3.92

  Abstract

    The present 3D Dataset contains the 3D model analyzed in Vautrin et al. (2019), Palaeontology, From limb to fin: an Eocene protocetid forelimb from Senegal sheds new light on the early locomotor evolution of early cetaceans. 

  Specimens
 
  M3 article infos

Published in Volume 05, issue 03 (2019)

PDF
3D models related to the publication: Fruits of Anacardiaceae from the Early Oligocene of Baraval Quercy locality, southwestern France
Muratcan Ersoy, Yiyun Chen, Anaïs Boura Logo, Fabiani Herrera Logo, Steven Manchester Logo, Maëva J. Orliac Logo, Renaud Lebrun Logo and Cédric Del Rio Logo
Published online: 13/05/2026

Keywords: Baravalosphaera; Choerospondias; Fruit; Oligocene; Palaeochoerospondias

https://doi.org/10.18563/journal.m3.299

  Abstract

    The present 3D Dataset contains the 3D models of two endocarps from the Oligocene of Baraval Quercy locality. These endocarps document new fossil genera within the Anacardiaceae family and illustrate the morphological diversity of this family during the Palaeogene. The CT-scan data were processed with ImageJ and Mimics Innovation Suite version 1.13 to reconstruct the specimens. Here we provide .stl files easy to read with the software Meshlab. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 12, issue 02 (2026)

PDF
3D models related to the publication: Dental morphology evolution in early peratheriines, including a new morphologically cryptic species and findings on the largest early Eocene European metatherian.
Killian Gernelle Logo, Marc Godinot Logo, Bernard Marandat, Dominique Téodori, Sandrine Ladevèze Logo and Rodolphe Tabuce Logo
Published online: 06/01/2025

Keywords: France; Herpetotheriidae; Molar; systematics; Ypresian

https://doi.org/10.18563/journal.m3.255

  Abstract

    This contribution contains the three-dimensional models of the most informative fossil material attributed to both Peratherium musivum Gernelle, 2024, and Peratherium maximum (Crochet, 1979), respectively from early and middle early Eocene French localities. These specimens, which document the emergence of the relatively large peratheriines, were analyzed and discussed in: Gernelle et al. (2024), Dental morphology evolution in early peratheriines, including a new morphologically cryptic species and findings on the largest early Eocene European metatherian. https://doi.org/10.1080/08912963.2024.2403602
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 11, issue 01 (2025)

PDF
3D models related to the publication: Morphogenesis of the liver during the human embryonic period
Ayumi Hirose Logo, Takashi Nakashima, Naoto Shiraki, Shigehito Yamada Logo, Chigako Uwabe, Katsumi Kose Logo and Tetsuya Takakuwa Logo
Published online: 17/03/2016

Keywords: human embryo; human liver; magnetic resonance imaging; three-dimensional reconstruction

https://doi.org/10.18563/m3.1.4.e1

  Abstract

    The present 3D Dataset contains the 3D models analyzed in: Hirose, A., Nakashima, T., Yamada, S., Uwabe, C., Kose, K., Takakuwa, T. 2012. Embryonic liver morphology and morphometry by magnetic resonance microscopic imaging.  Anat Rec (Hoboken) 295, 51-59. doi: 10.1002/ar.21496 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 01, Issue 04 (2016)

PDF
3D cranium models of fossils of large canids (Canis lupus) from Goyet, Trou des Nutons and Trou Balleux, Belgium
Allowen Evin Logo, Emmanuel Gilissen and Mietje Germonpré Logo
Published online: 06/11/2015

Keywords: Archaeozoology; Dog; Domestication; Pleistocene; Wolf

https://doi.org/10.18563/m3.1.3.e2

  Abstract

    Archaeozoological studies are increasingly using new methods and approaches to explore questions about domestication. Here, we provide 3D models of three archaeological Canis lupus skulls from Belgium originating from the sites of Goyet (31,680±250BP; 31,890+240/-220BP), Trou des Nutons (21,810±90BP) and Trou Balleux (postglacial). Since their identification as either wolves or early dogs is still debated, we present these models as additional tools for further investigating their evolutionary history and the history of dog domestication. 

  Specimens
 
  M3 article infos

Published in Volume 01, Issue 03 (2015)

PDF

Page 4 of 11, showing 20 record(s) out of 219 total